Thursday, June 29, 2017

March Bundle card sketch-SVG Cut Club


Hi everyone...it's my day to take over the SVG Cut Club blog...and I have a quick card to share that I made with a card sketch from the March bundle...LOVE these card sketches!!!! Thanks for stopping by...Lee-Ann :)
*click HERE to check out the SVG Cut Club blog...
**pan down and check out all the products that I used



Recipe:

  1. SVG Cut Club March Bundle-card sketch
  2. SVG Cutting Files-Build a Cupcake svg set PP-1140
  3. Jaded Blossom-Baked with Love and Card mat dies
  4. Doodlebug Cream and Sugar and Gingham and Linen Rainbow Petite Prints 6" pads, Rainbow Heart Shape Sprinkles
  5. Peachy Keen-Happy Family Emojis 1 1/8" faces
  6. Spectrum Noir Clear sparkle marker
  7. Versafine Onyx black ink
  8. EK chalk
  9. Signo white gel pen
  10. Neenah solar white card stock
  11. Distress ink-spun sugar, picked raspberry, worn lipstick, walnut stain, scattered straw
  12. Nuvo Crystal drops-simply white
  13. Glossy Accents
  14. Versamark ink
  15. Stampendous detail white embossing powder








Wednesday, June 28, 2017

Brewing Up Birthday Wishes for you!


Hi everyone...I have another Jaded Blossom/Doodlebug design to share. I LOVE this Cream and Sugar paper pad and Odds and Ends. Thanks for stopping by...Lee-Ann :)
**pan down to see the recipe


Recipe:

  1. Jaded Blossom-Coffee Break, Scallop Caddy dies, Panel dies
  2. Doodlebug-Cream and Sugar 6" pad and Odds and Ends
  3. PTI white card stock
  4. Glossy Accents
  5. Spectrum Noir Clear sparkle
  6. Pretty Pink Posh-Clear Sparkling confetti
  7. Versafine Onyx black ink
  8. Signo white gel pen
  9. WRMK 1/2" corner chomper

Tuesday, June 27, 2017

Congrats-You survived!


Hi everyone...it's my day to take over the Jaded Blossom blog...I have a quick Grad card to share that I made using a bunch of Jaded Blossom goodies...LOVE how it turned out! This one was even on TV when Jaded Blossom was a featured guest on Idaho TV. Thanks for stopping by...Lee-Ann :)

**pan down to check out all the products that I used
***click HERE to check out my post at the Jaded Blossom blog...



Recipe:

  1. Jaded Blossom-School Time Greetings, School dies, Star dies, Party Splatter, Stitched and Scalloped Hexagon dies
  2. Versafine onyx black ink
  3. Simon Says Sunshine ink
  4. Cartwright's Moonshine sequins
  5. PTI white card stock
  6. Recollections black card stock
  7. WRMK twine
  8. AC yellow card stock


Monday, June 26, 2017

Hugs and Kisses


Hi everyone...I have a quick card to share that I made using Jaded Blossom's dies and stamps and Doodlebug goodies...Pan down to check out all the products that I used...Thanks for stopping by...Lee-Ann :)


Recipe:

  1. Jaded Blossom-Candy Gram, Card mat dies, Flag dies
  2. Doodlebug-Cream and Sugar 6" pad and matching Odds and Ends
  3. PTI white card stock
  4. Versafine Onyx black ink
  5. Spectrum Noir Clear Sparkle marker
  6. Glossy Accents

Friday, June 23, 2017

Pop Tones Card Stock and Distress Oxide inks!




Have you ever just wanted to play with a new product to see what happens? That's what happened for today's post. I wanted to play with Pop Tones card stock(that's on sale right now at CutCardStock) and Oxide inks. I've seen people using this ink on dark coloured card stock and I wanted to try it out. It worked perfectly..love the results! Thanks for stopping by...Lee-Ann Kubinec :)

**pan down to check out my full pictorial and to see the products that I used
***Click HERE to see my post at the CutCardStock blog





Card 1 Tutorial

 -choose your products


 -choose more products...

 -oops...even more products...then cut your card stock into 4.25x8.5" for the orange card and 5.5x8.25" and score and fold your bases...then cut a 4.25" square of the orange card stock and a 4.25x5.5" black piece of card stock


-Get your inks and stamps ready to go


-ink and stamp your lilies with Wilted Violet distress oxide ink in a visual triangle


-then ink and stamp your open lily with Worn Lipstick Distress oxide ink...I stamped these in a triangle also...it's ok to over lap...as these are pigment inks and they will show over each other


-now ink and stamp your leaves with Cracked Pistachio Distress Oxide ink...I stamped these to fill in between my lily stamps


 -I then spritzed my images with my Distress sprayer...this oxdizes the ink and lightens it a bit...too cool

-I then dried my stamped images with my Marvy Heat tool


-I then grab my label dies and choose the 2 that fit my design


 -I first cut my design using a 4x5.25" stitched rectangle die(card mat dies) I then cut the largest label out of the center of my design...I then cut a white cougar piece of card stock into a 4 1/8 x 5 3/8" and I also cut the largest label from this...I then  applied Versamark ink to the edges of the rectangle and label...and applied Ranger Silver embossing powder and melted it with my Heat tool...now it will look like my whole layer is silver...except...it's not!!! I then cut the smaller label from the black licorice card stock and stamped my sentiment with Versamark after using my EK Success powder tool to avoid stray embossing powder. I then glued down my silver edges layer on my black card base...then added my stamped piece on top...I then glued my silver label to the cut out center and popped up my sentiment label with foam tape.


 -I then added white dots and doodles with my Signo white gel pen and then Scattered some Nuvo Crystal drops in Silver lining

Card 2 Tutorial

-grab your products

-First cut your orange fizz card stock ink a 4.25" square using a Stitched Square die
-Stamp your leaves in a visual triangle with Spiced Marmalade Distress Oxide ink


-stamp your leaf in Vintage photo Distress Oxide ink in a visual triangle...I decided to omit the Fossilized amber

-then ink and stamp your leaf in Fired Brick Distress oxide ink


-now spritz your stamped image with your Ranger Distress sprayer and dry image with a heat tool


-Cut a 4 3/8" white cougar card stock piece and apply Versamark ink and then Ranger Princess gold embossing powder to the edge and melt with a heat tool


-Choose the label dies that best fit the image...cut the largest from Cougar white card stock and repeat the embossing process...then cut the smaller label out of orange card stock and apply EK powder tool and stamp your sentiment with Versamark and then use the same embossing powder and melt it with a heat tool

-Glue your embossed edge card stock on your card base...then add your orange stamped image and glue down...then glue down your embossed edge label...the pop up your orange embossed sentiment label with foam tape...then add dots with a Signo Gold gel pen and scatter Nuvo Crystal drops in Bright gold on your finished card

Recipe:

  1. CutCardStock-Pop Tones card stock-black licorice and orange fizz, Cougar white 80lb card stock, Signo white gel pen
  2. Jaded Blossom-Autumn Leaves, Label dies, Lilies, Super Sized Thank You, Love and Kindness, Card Mat dies, Stitched Square dies
  3. Distress Oxide ink-Wilted Violet, Cracked Pistachio, Worn Lipstick, Vintage Photo, Spiced Marmalade, Fired Brick
  4. Ranger-Princess Gold and Silver Detail Embossing Powder
  5. Versamark ink
  6. EK Success Powder Tool
  7. Martha Stewart Scoring Board
  8. Fiskars Paper Trimmer
  9. Sizzix Vagabond Diecutting Machine
  10. Marvy Heat Tool
  11. Ranger Distress water sprayer
  12. Signo white and gold gel pens
  13. Nuvo Crystal Drops-Silver lining and Bright Gold

Twisty Pop Up Card from SVG Cutting Files



Hi everyone...it's my day to take over the SVG Cutting Files blog-YAY!!! I have a cool new file from SVG Cutting Files called the Twisty Pop up card...LOVE and-No more measuring!!...just cut it out and decorate. I made a Grad card using mine...but the possibilities are endless. This card is super easy to put together...I actually made a video for SVG Cutting Files...showing how easy peasy it is....check it out below. I dolled this up with a cute emoji face from SVG cutting Files St Pat's Emoji's...and a plethora of Jaded Blossom Goodies. Get this cool Twisty Card HERE! Thanks for stopping by...Lee-Ann :)

**pan down to check out my instructional video and check out the product list...
***click HERE to check out the SVGCuttingFiles blog






Recipe:
  1. SVG Cutting Files-Twisty Pop Up Card(NEW)-get it HERE!!! , Emoji St Pat's PP-3098
  2. Jaded Blossom-School Time Greetings, Banner dies, Card mat dies, Stitched Square dies
  3. PTI white card stock
  4. Neenah solar white card stock
  5. Neenah Desert storm card stock
  6. Cartwright's Moonshine sequins
  7. AC black card stock
  8. Versafine Onyx black ink
  9. Silhouette machine font-Broadway
  10. Echo Park 6" pads-Magicical Adventure and Magical Adventure Stripes and Dots

Wednesday, June 21, 2017

Sweet Birthday Wishes!


Hi everyone...I have another quick card to share that I made using Jaded Blossom and Doodlebug goodies...Thanks for stopping by...Lee-Ann :)
**pan down to check out all the products that I used


Recipe:

  1. Jaded Blossom-Card mat dies, Supersized Birthday Greetings, Flag dies and Spring dies 1 and 2
  2. Doodlebug-Cream and Sugar 6" pad, matching Odds and Ends and Enamel shapes-Rainbow Hearts
  3. PTI white card stock
  4. AC white card stock
  5. Spectrum Noir clear sparkle marker
  6. Glossy Accents
  7. Nuvo Glitter drops-white blizzard
  8. Stampendous Detail white embossing powder
  9. Versamark